Tied Swivel flange
Flexel CG11 DN 1400x300 PN16
SWIVEL FLANGE EXPANSION JOINT
Tied Swivel flange expansion joint
- Tie rods allow the joint to move only laterally, while restricting axial and angular movements.
- Swivel Flange: A good option when the pipeline flanges have angular misalignment.
- Vulcanized by autoclave.
- Sizes up to DN3600 (144″).
- Suitable for vacuum conditions.
- Lengths upon request.
- Arch designed according to the required movements.
- Option for PTFE liners.
FLEXEL CG13 DN 1400X600 PN16
tied Multi arch expansion joint
Allows the design and manufacturing of multi-arch joints, whenever needed:
- Increased flexibility: The ability to absorb movements increases proportionally with the number of arches.
- Lower stiffness: Decreases proportionally with the number of arches.
FLEXEL CG11 DN 1200X300 PN16
tied Molded option
- Allows for more economical joints and shorter delivery times, if the requirement fits the tooling capability.
- Manufactured by molding and vulcanising in a hydraulic press.
- Dimensions from DN25 (1″) to DN1200 (48″).
- Fixed lengths.
- Single arch profile: Default maximum movements.
- Working pressure up to 16 bars.
- Remarkable performance under vacuum pressures.
- Option for PTFE liners.
FLEXEL CG11 DN 1200-1400X350
tied Conical expansion joints
- These are conical joints designed to connect pipes of different diameters.
- Vulcanized by autoclave.
- Dimensions from DN25 (1″) to DN3600 (144″).
- Suitable for vacuum conditions.
- Concentric or excentric geometry.
- Maximum reduction factor of 20º.
- With one or more arches.
We will help you choose the expansion joint that best suits your needs
Other expansion joints
We will help you choose the expansion joint that best suits your needs
