Full-face flange

Safetech design and manufacture multi-arch joints whenever needed:

• Increased flexibility: The ability to absorb movements increases proportionally with the number of arches.
• Lower stiffness: Decreases proportionally with the number of arches.

• Allows for more economical joints and shorter delivery times, if the requirement fits the tooling capability.
• Manufactured by molding and vulcanising in a hydraulic press.
• Dimensions from DN25 (1″) to DN1200 (48″).
• Fixed lengths.
• Single arch profile: Predetermined maximum movements.
• Working pressure up to 16 bars.
• Remarkable performance under vacuum pressures.
• Full-face rubber flanges: Exceptional sealing.
• Option for PTFE liners.

• Designed to be installed when space is limited.
• Allows for more economical joints and shorter delivery times, if the requirement fits the tooling capability.
• Manufactured by molding and vulcanising in a hydraulic press.
• Extremely flexible and compact.
• Dimensions from DN50 (2″) to DN400 (16″).
• Working pressure of 16 bars.
• Suitable for working under vacuum conditions.
• Capable of absorbing large movements, with a fixed length of 120mm.
• Threaded flange bolt holes – thus preventing damage to the rubber outer cover.
• Ideal for installations with limited space.
• Full-face rubber flanges: Exceptional sealing.

• These are conical joints designed to connect pipes of different diameters.
• Vulcanized by autoclave.
• Dimensions from DN25 (1″) to DN3600 (144″).
• Suitable for working under vacuum conditions.
• Concentric or excentric geometry.
• Maximum reduction factor of 20º.
• Full-face rubber flanges: Exceptional sealing.
• With one or more arches.

• Pre-formed flexible hoses with flanged ends.
• Suitable for working under vacuum conditions.
• Available in multiple shapes; from 90º elbows to complex shapes.
• Full-face rubber flanges: Exceptional sealing.

• Usually employed in gas and air exhaust ducts and in forced draft ventilation systems.
• Available in any size.
• Full-face rubber flanges: Exceptional Sealing.
• Corners may be round, single mitre or double mitre.
• Available with no arch or with multiple arches.